The hot water tank is the obvious cause of this issue, but there are also other factors that can contribute to it. Quarter Moon Plumbing, AC & Heating offers these tips for fixing this issue. View the site of Candu Plumbing of Thousand Oaks here. These include blowing out the gas water heater and changing the shower valve parts.
Blowing out a gas water heater
If hot water isn’t coming out of the shower after turning on the gas water heater, the problem may be due to a blown-out pilot. This happens due to gas pressure issues or wind. This is a simple fix, but you should follow safety procedures.
First, check the pilot light. If it goes out, you may have a gas leak. If this is the case, you should call your gas company. They will be able to help you determine the source of the problem and make any necessary repairs. However, if this problem persists, you should call a professional HVAC service.
Blowing out a gas water heater for warm water not coming out of the shower in Thousand oaks should be done only by a licensed plumber. This type of heater uses a standing pilot that must be re-lit manually. However, newer gas water heaters use an electronic ignition system that does not require a pilot light.
If you suspect that a gas water heater is the cause of cold water, you may need to flush it. This can extend the life of the water heater. To do this, connect a hose outside and open the drain valve. You should then use a half-minute blast of water at full force. You should repeat this procedure every three months or so.
Mineral buildup in the shower head
If your shower head is showing signs of mineral buildup, it may be time to replace it. This process may not be as simple as simply scrubbing it clean, but there are a few things you can do at home. The first step is to clean the shower hose with vinegar and water. Once a month, soak the hose in the same solution. You should also clean the pipes in the showerhead if possible. If the buildup is severe, you may want to call a Thousand Oaks plumber to fix the problem.
Mineral buildup in shower heads can lead to poor water pressure and poor water flow. To remove this buildup, massaging the shower head with a toothbrush or finger can be very effective. Another option is wrapping vinegar around the shower head, which also helps to remove the mineral buildup. You can also use household cleaners to do this. If you have a showerhead with a rubber nozzle, you may want to try this method first.
Hard water is a common cause of mineral buildup in shower heads. It contains high levels of magnesium and calcium, which can lead to odors and damage to hair and skin. These minerals leave tiny deposits in shower heads, preventing water from reaching the users. The best way to prevent mineral buildup in shower heads is to regularly clean them.
Candu Plumbing & Rooter
22144 Eccles St, Canoga Park, CA 91304